RCMelton82 1 Posted January 16, 2017 Who here has actually used Flexi and a Titan 3 together? I'm being told by some people they will work fine, just take it slow. Others are telling me the contour cutting is limited to 29x29 and Flexi cloud. I usually import motocross graphic files from Adobe and then contour cut them. Trying to find out if this will work or what I will need. Thanks Share this post Link to post Share on other sites
RCMelton82 1 Posted January 18, 2017 Yea. Ill think i'll be safe and just keep saving for Graphtec. lol Share this post Link to post Share on other sites
jderry1978 16 Posted January 19, 2017 I use flexi 12 with a Titan 3- 68" plotter with no problems contour cutting. You have to change in production manager, how far apart before a middle registration marks is needed. The max is 50". So as long as you are cutting 4ft x 4ft worth of decals at a time it works perfectly. I have several videos of it working on YouTube, under Bob & Tom's Graphics. Share this post Link to post Share on other sites
Grafix 1 0 Posted January 24, 2017 jderry, I've tried using some of your videos but still no luck. Is there a minimum size that it will cut? I was trying to cut a 12x 24 decal. It wont even try to read registration marks. I have the cutter on and everything set before I hit send. It just says cannot read registration marks. It doesn't even try, it doesn't move. I've been fighting this a year. Any help would be appreciated. Share this post Link to post Share on other sites