BORDERS

[Donnie 3]

How would you go about making a sign just say 12x8 I want the top one third part of the sign solid red with the text reverse filled.

Then the rest of the sign in a red border outline.

Thank you Donnie!

I'm sorry i have VMP version 4

[slice&dice 2,450]

Hi Donnie,  I would just make 3 stripes, and then place them manually into position on the substrate to create the borders.

 

 

[Donnie 3]

Slice&Dice!

I will get back to on this and show you want I want to do.

Thanks Donnie!

This is what i want to do,how would i go about doing this in VMP.

[xpaperman 719]

What software are you using?

[xpaperman 719]

How about this?  Just use white text on top and red on bottom.  If you need to change the size of the red area just node edit it.

halfhalfsign.EPS

[Donnie 3]

I will try this it looks like would work I did say i have vinyl master pro version 4

[slice&dice 2,450]

5 hours ago, Donnie said:

This is what i want to do,how would i go about doing this in VMP.

OK,  when you said 8x12 I immediately thought of 8' x 12' (feet, not inches) because my signs are routinely large and that is my frame of reference.

For a little sign like that one, just use an EXISTING item within the Graphics ClipArt Library of Vinyl Master. The BusStop no Parking would work, just change the text.

You're welcome.

noparking.eps

[Donnie 3]

Ok thanks a lot.

Donnie!

 

[Donnie 3]

28 minutes ago, slice&dice said:

OK,  when you said 8x12 I immediately thought of 8' x 12' (feet, not inches) because my signs are routinely large and that is my frame of reference.

For a little sign like that one, just use an EXISTING item within the Graphics ClipArt Library of Vinyl Master. The BusStop no Parking would work, just change the text.

You're welcome.

noparking.eps

Ok thank you very much.

Donnie!

[Signs and Designs 17]

make the size border you need, then draw the size rectangle you need within the border and weld. type the words you need in the box, change the words to the same color as the box and border then punch out. You now have a one color sign...

[Donnie 3]

1 hour ago, Signs and Designs said:

make the size border you need, then draw the size rectangle you need within the border and weld. type the words you need in the box, change the words to the same color as the box and border then punch out. You now have a one color sign...

Thanks a lot i did get it.

I want to thank all of you for your help.

Thanks Donnie!