rebelracer8 0 Posted October 11, 2016 Does anyone know how I can clean this sign off from sun fade Share this post Link to post Share on other sites
mark-s 1,126 Posted October 11, 2016 Not going to happen....replacement only mark-s Share this post Link to post Share on other sites
rebelracer8 0 Posted October 11, 2016 Does anyone know where I would be able to get sheets like these to replace them Share this post Link to post Share on other sites
mark-s 1,126 Posted October 11, 2016 Look for a lexan sheet supplier in your area. mark-s Share this post Link to post Share on other sites
Wildgoose 4,200 Posted October 11, 2016 You should have a sign supply somewhere local that will cary and usually offer to cut for a small fee. You might consider Acrylic as an option as it will resist yellowing much better. Lexan is much more impact resistant but more susceptible to the sun. Acrylic is more brittle and can crack if you get aggressive with it but cheeper and stays white longer. Typically acrylic is used in my area unless it's down low enough that vandals have easy access. Share this post Link to post Share on other sites
slice&dice 2,450 Posted October 11, 2016 Flip it over to the other side? Share this post Link to post Share on other sites
andygeekboy 62 Posted October 11, 2016 1 hour ago, slice&dice said: Flip it over to the other side? That's what she said ^^ please forgive me, it's an illness 1 Share this post Link to post Share on other sites
Jay2703 704 Posted October 11, 2016 1 hour ago, andygeekboy said: That's what she said ^^ please forgive me, it's an illness That will be held against you when you run for president. 3 Share this post Link to post Share on other sites
darcshadow 1,626 Posted October 11, 2016 4 hours ago, slice&dice said: Flip it over to the other side? Might look ok during the day, but when the light is on behind it you'd still see the shadow. Probably not worth the time, but you might be able to sand it down to remove the shadows, would be a lot of work though. 2 Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted October 11, 2016 like darcshadow said depends on the quality of work you want to be known for 1 Share this post Link to post Share on other sites