Carlos Sanunga 0 Posted June 17, 2016 Hi, I'm new to the forum and I was wondering if anyone could help me. My CE5000-60 broke around 2 weeks ago and I'm not able to get it to a dealer or anywhere where it could be fixed, I hired a technician and he informed me that I need 2 of the following ribbon cables:SUMITOMO-Y AWM 20861 105C 60V VW-1 -F- 30 PIN The problem is that I can't find this anywhere, I did find the followingSUMITOMO-C AWM 20861 105C 60V VW-1 -F- 30 PIN you will notice that this one is C instead of Y and I don't know what the difference is and if it will fix my CE5000-60 This is a link to the one that is C: http://www.ebay.com/itm/Flat-flex-ribbon-cable-SUMITOMO-C-AWM-20861-105C-60V-VW-1-F-/252264755245?_trksid=p2141725.m3641.l6368 I will attach a picture of the part that I need for reference. Thanks you for your help. Share this post Link to post Share on other sites
Carlos Sanunga 0 Posted June 17, 2016 Note: I called 2 dealers around my area, one of them said that they would provide me with the part but never called back then I called then they said they couldn't find it.The other dealer told me that they had it but I had to bring the machine in, I explained to the lady that It was not possible for me to do that due to my CE5000-60 being in another country, she said that there is nothing they can do. Share this post Link to post Share on other sites
lizzylou 11 Posted June 17, 2016 Are other cable brands the same? Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted June 17, 2016 Ebay user Jaybird had the same problem a while back, and he used a different # cable and it worked was also for a Graphtec Ce5000... From this thread.below. http://forum.uscutter.com/index.php?/topic/49453-graphtec-craft-robo-pro-issues/ He used the cable from here. http://www.ebay.com/itm/221239217723?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3A Share this post Link to post Share on other sites
Carlos Sanunga 0 Posted June 17, 2016 Ebay user Jaybird had the same problem a while back, and he used a different # cable and it worked was also for a Graphtec Ce5000... From this thread.below. http://forum.uscutter.com/index.php?/topic/49453-graphtec-craft-robo-pro-issues/ He used the cable from here. http://www.ebay.com/itm/221239217723?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3A Thank you very much, can't believe that I didn't find that thread before. I will report back to see how it goes. Share this post Link to post Share on other sites
Carlos Sanunga 0 Posted June 17, 2016 Are other cable brands the same? Well the brand is the same and the pin number but there is no way for me to tell if it would work but someone below clarified it. Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted June 17, 2016 As I have been told, I have a memory, like a external hard drive Once I have read it, it is stuck in my head. I knew that thread was here. You are very welcome I hope it gets your cutter going again. Share this post Link to post Share on other sites