djque 246 Posted April 23, 2016 So I got a few yrd of this siser brick and I must say its very very very very thick did I mention very thick. best order a new blade holder and new blade which I just ordered cuz I used my blade holder for my rhinestone and flock holder. this stuffif thick. I used a 60 degree blade and the first 2 tries it cut but not neat the edges was not straight as the rubber was not cut all the way thru. my blade is so far out I was scared it might go thru and cut up my cutting strip. but it was all good. here is my settngs Graphtec Ce5000-60 Cut in Reverse Cleancut Blade 60* Graphtec holder blue Blade out about creditcard length. speed 14 pressure 25 offset angle 0 blade offset cleancut recommendation Hotronix Fusion settings Preheat garment for 5 seconds to remove wrinkles and/or moisture Cover with a teflon sheet to prevent scorching (optional) Temperature: 311 F/155 C Pressure: Medium-Firm Time: 10 seconds front Time: 10 seconds on the back shirt threaded Peel HOT Share this post Link to post Share on other sites
Wildgoose 4,200 Posted April 23, 2016 What pressure do you normally cut at dj? Share this post Link to post Share on other sites
djque 246 Posted May 9, 2016 I usally cut flock at 18 or sticky flock at 20 and 2x cut. This stuff is thick. 1 Share this post Link to post Share on other sites