JDS RGB 1 Posted January 25, 2016 Hi ive just joined here after buying a GoldCut jk721 and trying to find any info to assist me in using it properly and hopefully in future be able to pass that on to other newbies like myself. Share this post Link to post Share on other sites
slice&dice 2,450 Posted January 25, 2016 Cheerio from across the pond. I would imagine that with SignBlazer program using a RedSail (RS800c) driver, you should be OK. Here ya go -- have fun !!! http://support.uscutter.com/index.php?/Knowledgebase/Article/GetAttachment/190/24198 1 Share this post Link to post Share on other sites
JDS RGB 1 Posted January 25, 2016 Cheerio from across the pond. I would imagine that with SignBlazer program using a RedSail (RS800c) driver, you should be OK. Here ya go -- have fun !!! http://support.uscutter.com/index.php?/Knowledgebase/Article/GetAttachment/190/24198'>http://support.uscutter.com/index.php?/Knowledgebase/Article/GetAttachment/190/24198 Ive got it running on signcut pro, but certain areas of it are beyond my capabilities at the moment, currently going through every youtube video using inkscape and signcut. Share this post Link to post Share on other sites
slice&dice 2,450 Posted January 25, 2016 OK, SignCut is a good program. What are you attempting to achieve? Share this post Link to post Share on other sites
JDS RGB 1 Posted January 25, 2016 OK, SignCut is a good program. What are you attempting to achieve? Well i have a large format printer with UV inks, i wanted to be able to print a design on that, for example a sticker, then set it up on the goldcut and do a contour cut around the the sticker/stickers, but im at a loss regarding registration marks etc Share this post Link to post Share on other sites
slice&dice 2,450 Posted January 25, 2016 OIC. Well, you may want to open another thread in the SignCut program category here, and see if anyone has some experience with that process. Once again, howdy, and you'll have plenty of people chime in to assist you with specific questions as you go along. 1 Share this post Link to post Share on other sites
dwp99 283 Posted January 28, 2016 Hello and Welcome. Share this post Link to post Share on other sites
Molan_Labe 38 Posted January 29, 2016 Hello Mate, welcome.. Where you located in the UK.. I have some friends over there. Share this post Link to post Share on other sites