Graphtec CE6000-60

[infinityteamwear 0]

Hi, I'm having a problem with the afore mentioned plotter and presume I'm doing something basic wrong. It's generally worked fine for nearly 2 years now, changed the blades etc and generally kept on top of maintenance. However last week I think I may have adjusted a setting or done something odd as now the cutter 'jumps up and down' an awful lot when cutting.

 

I've attached a video and if anyone can help it would be so much appreciated!!

IMG_2417.MOV

[infinityteamwear 0]

I think it's something to do with cutting curves as this is when it jumps, and really only on letters.

 

Confused!

[Wildgoose 4,200]

Sounds like you turned on tangential emulation. I'm not a graphtec owner but that could be the reason. Is it still getting the job done correctly? 

[DCMoney 91]

Sounds like you turned on tangential emulation. I'm not a graphtec owner but that could be the reason. Is it still getting the job done correctly? 

 

+1, turn tangential mode off.

[mb20music 760]

Section 7-3

 

http://www.graphtecamerica.com/docs/User_Manuals/CutPlot_UM/CE6000_Manual(CE6000-UM-151-02).pdf