Knobhill 0 Posted April 21, 2008 Anyone having issues with a PCUT 630 using Flexi pro-8? I've not yet put the new adition into production yet so I'm looking for opinions with this combo. I hate to pay for a 2nd license and have problems. Works great with the bundled software. This forum has yielded several answers to questions I never needed to ask.Thanx all. Share this post Link to post Share on other sites
kenimes 42 Posted April 21, 2008 I have cut fine with the PCut 630 and my Flexi Starter 8, so it should not be a problem. Share this post Link to post Share on other sites
CyberSultan 6 Posted April 21, 2008 Does anyone know if Flexi has a trial period on their Starter software (to test before purchasing)? I looked on their site, but didn't see anything listed for Starter. Just want to compare with what I got with my Copam. Thanks. Share this post Link to post Share on other sites
BannerJohn 1,324 Posted April 21, 2008 I have never seen a trial version of Flexi anywhere,and I have looked. Share this post Link to post Share on other sites
Knobhill 0 Posted April 22, 2008 I have cut fine with the PCut 630 and my Flexi Starter 8, so it should not be a problem. That's what I needed to know. :thanks: I've also not seen a demo for Flexi anywhere. Can't hurt to call them and ask. Share this post Link to post Share on other sites
CyberSultan 6 Posted April 22, 2008 I found this link that at least allows you to download and see what the program looks like. It won't let you cut anything in the demo mode, but you can try out some of the functionality. http://www.test245.wwbcity.com/flexi85.zip Share this post Link to post Share on other sites
protek 0 Posted April 30, 2008 I am using 8 and cannot get the PCUT CTN630 to work right at all! I am narrowed down to .13-.15 in offset. It has taken me two weeks to get letters or small parts of the graphic to complete a cut. Now I just have to decide if I want the cutter to leave an unnecessary cut to the left or right. I am getting close to done with this machine. If you have if and want to get flexi 8 pro, go for it! I don't think it is Flexi, I think it is the machine Share this post Link to post Share on other sites
Knobhill 0 Posted May 1, 2008 Sorry to here that protek. What seems to be the major issue?... I did a quick demo with my machine and had to pack it up for the move to my new shop. I won't be back up and running for a couple weeks at least while waiting for the space to clear. So I'm using a friends shop for now to fabricate. It gives me time to build up a little on inventory. Cheers Share this post Link to post Share on other sites