djque 246 Posted July 1, 2015 I got mines from ebay for that priced shipped. only thing is there louder than the stock but maybe cause there aluminum. Share this post Link to post Share on other sites
KYSIGN 233 Posted July 2, 2015 The two I received from Memphis, TN are not worth keeping. I'll be posting two images to help explain. I just finished testing both holders and I had issues with both. The blade depth will not even stay set on these. I contacted support for a return. In this photo you can see how the brass end fell out of the plastic cap and may cause wobble. You can see the uneven thumbscrew shaft on the left holder. You can see the inside where the blade sits on the right. In this photo the holder on the left is from the auction site and the holder on the right is from here. I have the blade depth set correctly on both. Notice how the one on the right has the threads extended out very far. It is out so far that it wobbles. Share this post Link to post Share on other sites
knucklehead 530 Posted July 2, 2015 Hate to say it, but sometimes, you really do get, what ya pay for. I'm pretty simple, I use one holder, and a 60 degree CC blade for everything. Share this post Link to post Share on other sites
KYSIGN 233 Posted July 2, 2015 Hate to say it, but sometimes, you really do get, what ya pay for. I'm pretty simple, I use one holder, and a 60 degree CC blade for everything. I use one for vinyl, one for htv and one for custom cut labels. I ordered these because they were on sale and figured they would be better or at least equal in quality to the ones found elsewhere. Share this post Link to post Share on other sites
VictoryVinyl 13 Posted July 2, 2015 I used one of mine today. Set up a new blade for cutting sandblast mask. No issues so far (fingers crossed!) Share this post Link to post Share on other sites
gcextreme 475 Posted July 6, 2015 That is a good deal. When the sale is over you can get them on Ebay for $14 shipped from China all day long. do u have the link for the ones on ebay? i bought one a while back, want to get another one Share this post Link to post Share on other sites
pshawny 410 Posted July 6, 2015 I bought mine from this seller. You'll want the CB09 holder. http://www.ebay.com/itm/HQ-Graphtec-CB-09-CB-15-Blade-Holder-Graphtec-Vinyl-Cutter-Cutting-Plotter-/321165465303 Here is a cheaper one. http://www.ebay.com/itm/HQ-Graphtec-Blade-Holder-for-Graphtec-CB-09-CB-15-Vinyl-Cutting-Cutter-Plotter/161145361008 Share this post Link to post Share on other sites
knucklehead 530 Posted July 6, 2015 I use one for vinyl, one for htv and one for custom cut labels. I ordered these because they were on sale and figured they would be better or at least equal in quality to the ones found elsewhere. Understand completely. I looked at them too. I have found I can do everything I need with a fresh CC 60 degree blade. And, that's probably 98% of the materials I use. Share this post Link to post Share on other sites