Printing problems SW Minnesota

[Taz the cutter 0]

I just got "Sure Cuts a Lot 3 Pro and can not get anything to print to the MH MK2 cutter. After multiple attemps it even screwed up my 3 existing printers by adding the cutter to each of the virtual USB ports. I finally went into the registry and removed all references to the Printer of the USB cutter. I reinstall the other three printers and waited until last to reinstall the USCutter and still no apparent connection to this cutter. When I plug the USB cable in in makes an acknowledging tone. I try test printer and nothing. I have windows 8.1 and have restarted with the "disable driver signature Enforcement" as well and still nothing.

 

Help please!!

 

Thank you

 

[Dakotagrafx 7,297]

think your problem is you are trying to install a plotter like a printer - did you follow the directions in the support area for your cutter?  also I never could get my cutter to print 

[slice&dice 2,450]

Taz ?

 

 

 

Get the ftdi driver, then download and install SignBlazer, choose RedSail driver, and you should be good to go.

 

 

FTDI

 http://support.uscutter.com/index.php?/Knowledgebase/Article/GetAttachment/203/23188

 

and SBE (unlocked)

http://support.uscutter.com/index.php?/Knowledgebase/Article/GetAttachment/190/24198