speedyts 3 Posted January 15, 2015 Everything else is working fine. The blade holder travels back and forth, but it just stopped moving up and down, hence, not cutting. Any advice on what to check to possibly get this thing going on my own? Thanks in advance. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted January 15, 2015 call support tomorrow they will run you thru checking the selenoid in the carriage. if you move it by hand does it go up and down easy when powered off? Share this post Link to post Share on other sites
speedyts 3 Posted January 15, 2015 Yeah, it's free as can be. Moves smooth. Share this post Link to post Share on other sites
speedyts 3 Posted January 15, 2015 Figured it out. There was a broken wire that had to be soldered. 3 Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted January 15, 2015 Glad you got it figured out Share this post Link to post Share on other sites
rgbintx 0 Posted January 18, 2018 I am having the same issue. It has worked great in the past, but just moved and now no up and down movement with the blade holder. It moves freely by hand and returns freely. I don't see any broken wires. Share this post Link to post Share on other sites