Phototec 1 Posted January 11, 2015 I have a Graphtec FC7000 and having some weird issues with it, after changing the cutting blade and cutting strip, when sending the next job to the cutter it went crazy, it started cutting the job sent from CM2 about 10 times larger than the orig. AI file, I stopped the job and tried to send it again, but the same thing happened. I didn't do anything different than I always do, except I did notice that I have been having a lot of static electricity these days and when I torch the cutter I get a static shock. Could this have caused some internal damage to the cutter? One other thing I noticed, I use CM2 to send files directly from AI to the FC7000, and now for some reason I can't poll the media size, when you select the Poll Size Icon nothing happen, the media size only defaults to 29.60". So I'm not sure if the CM2 is communicating with the cutter correctly? What causes the image size to be cutting about 10 bigger than the file sent to the cutter? Any thought or help is appreciated. Thanks Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted January 11, 2015 I have this cutter... I would do a factory reset, by turning off the power, then turning the power back on WHILE holding down the UP arrow, . If that doesn't work, also do a reinstall of your cutting software. I don't ever have problems with static on my machine, and I also can get shocked by static...I touch my media basket and sometimes get it... Share this post Link to post Share on other sites
Phototec 1 Posted April 6, 2015 Mz Skeeter, Thanks for the suggestion, however NOW I have another problem: I powered on holding the up arrow and then it asked me to select HP-GL or GP-GL, when I selected GP-GL something happened and now the display in in Japanese, and I can't figure out anything ? I don't have any idea of what the to do, I can't read Japanese! Do you know how I can get the display to be in ENGLISH? This is bad..... Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted April 6, 2015 I have the FC 7000-mk2 but I can step you thru the menu with my cutter. Hit MENU 1 time Hit NEXT 3 TIMES Choose F2 SPEED This is the Background settings. And this is where it starts with LANGUAGE......when you get there.. USE your UP>DOWN arrow keys...and go thru the different languages. Share this post Link to post Share on other sites
Primal Decals 621 Posted August 4, 2017 On 4/6/2015 at 8:53 AM, MZ SKEETER said: I have the FC 7000-mk2 but I can step you thru the menu with my cutter. Hit MENU 1 time Hit NEXT 3 TIMES Choose F2 SPEED This is the Background settings. And this is where it starts with LANGUAGE......when you get there.. USE your UP>DOWN arrow keys...and go thru the different languages. @MZ SKEETER any idea what would cause the graphtec to cut an image smaller than what was designed? My friend has a graphtec fc7000-75 with this issue. Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted August 5, 2017 Resolution steps That should be in cutting software Calibrate Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted August 5, 2017 and make sure the cutting sofware isn't scaling it when it is sending the file - like in flexi we can select a percentage to have the file scaled to different size 1 Share this post Link to post Share on other sites
Primal Decals 621 Posted August 5, 2017 ok thanks guys, ill let him know. Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted August 5, 2017 your welcome Share this post Link to post Share on other sites