jdthedj10 2 Posted December 8, 2014 Is there a way to split a large image.? lets say you image is 28" x 28" and you are using 15" media. Is there a way to cut half of it then cut the other half? I mean this without having to create 2 different image files to be pieced together. Share this post Link to post Share on other sites
jdthedj10 2 Posted December 8, 2014 What exactly is that Eazy? How is it done? Share this post Link to post Share on other sites
GraphxNMore 282 Posted December 8, 2014 http://support.uscutter.com/index.php?/Knowledgebase/Article/View/37/5/cutting-job-into-sections-tiling Share this post Link to post Share on other sites
pshawny 410 Posted December 8, 2014 Make a 28" circle in SignBlazer. Cutter > Setup > Set vinyl width to 14" and hit OK. You'll now see two boxes, a.k.a. tiles, labeled 1 & 2 in the bottom left corner of each box. When you hit CUT! you will be able to cut the first tile and then the second tile. In the Cutter > Setup menu you can add a tile overlap. It adds a little bit to the design so you can overlap one piece on top of the other. Waste some vinyl and play around with it. 2 Share this post Link to post Share on other sites
jdthedj10 2 Posted December 8, 2014 Thank you pshawny, now it makes sense. 1 Share this post Link to post Share on other sites