Size of mh871

[JonnnScott 58]

I'm getting ready to buy the 34" mh 871 cutter and I was wondering if anyone can give me full dimensions. I cannot seem to find them on the website or any other listings. I just want to clear out some space before hand so I don't have to do it after.

[MZ SKEETER 4,708]

Do your self a big favor and step up to at least the SC cutter..Or higher if you can afford it..  Many people stated why in this thread and many other threads about the MH cutter on this forum,

 

http://forum.uscutter.com/index.php?/topic/46786-another-going-to-buy-a-cutter-thread/

[JonnnScott 58]

Even if I did make the step up to the SC cutter. It would be the 34" model as well. So I would still need the physical size of the machine weather it be the mh or sc. That is what I am asking for, i have read plenty of positive and negative review on both cutters.

[MZ SKEETER 4,708]

They are all a close estimate of sizes on value cutters.  I have a 36"  Seiki    24"W  x 35-37"L  x 43"H  

[101LEDs 100]

Even if I did make the step up to the SC cutter. It would be the 34" model as well. So I would still need the physical size of the machine weather it be the mh or sc. That is what I am asking for, i have read plenty of positive and negative review on both cutters.

Did you consider the LPII? I have had no machine problems.  43" wide x 21" deep x 45" tall.  Those include the stand for height and depth.

[slice&dice 2,450]

Hi, just a heads-up ---   You'll need to have some clearance away from a wall because when long lengths of vinyl run through the unit, it will normally back-feed when cutting and you don't want it to hit the wall (creates huge static problems).

Using a media basket is a good solution. Neither the MH nor the SC can accommodate a media basket but the LPII will do so (for an extra few bucks). If I was to order a 'value cutter' today, the 32" LPII for $600 would be my choice  ---  and I have used both the MH and SC in the course of my sign-making over the years.