luongtr 1 Posted September 22, 2014 All I am a complete Noob. When I send the job to print the job cuts 4 inches to the left. I have no idea why. Please help Share this post Link to post Share on other sites
mfatty500 454 Posted September 22, 2014 What programs are you using? Some more info please. Share this post Link to post Share on other sites
mfatty500 454 Posted September 22, 2014 Sorry didn't see this was in the flexi forum, do you have the graphic all the way to right in production manager? What plotter are you using? Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted September 22, 2014 Not real sure what you are explaining, But most all cutters cut right to left... Maybe more info will help... Share this post Link to post Share on other sites
luongtr 1 Posted September 30, 2014 Hey guys sorry I was vague. I am using the MH721. I am using the program that came with it, Sur Cut A Lot 3 Pro. When I center an image in the program and send it to cut the cutter cuts off of my working area to the left. Share this post Link to post Share on other sites
arty-rc 719 Posted September 30, 2014 Do you move the blade carriage over to the right and hit the origin button before cutting? Share this post Link to post Share on other sites
luongtr 1 Posted September 30, 2014 Arty-rc I do not move anything on the cutter. I left everything as is Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted September 30, 2014 Your cutter cuts right to left,, You have to have the carriage head far enough to the right, so that it does not go off.. Put your design in the lower right hand corner of your software. Make sure your vinyl is wide enough for your order.....You must click the origin button on your vinyl cutter, before you click send on your cutting software. That determines the distance your design will start cutting from.. 1 Share this post Link to post Share on other sites
pshawny 410 Posted September 30, 2014 With the pinch rollers up, you can move the blade carriage side to side manually. Move the blade carriage so that the blade will touch down slightly to the left of the pinch roller on the right hand side, about 1/2" or so from the right edge of the vinyl. Put the pinch rollers down and push the set origin button on the cutter. 1 Share this post Link to post Share on other sites
luongtr 1 Posted September 30, 2014 Boy do I feel stupid now. Thank you so much pshawny!!!!! 1 Share this post Link to post Share on other sites