wf2ste 11 Posted September 18, 2014 Hi Guys, I always post for help with images but this one doesn't look too complicated and I would like to do it myself for a change. Can somebody point me in the right direction to re creating the attached image. Any help you can give would be great! Thanks in advanced 1 Share this post Link to post Share on other sites
mr300s 1,272 Posted September 18, 2014 Go to inkscape trace the hands then re create the text and you should be done support is "marcellus Se" bully is "regan alt and Off is " Swls 721LT 1 Share this post Link to post Share on other sites
wf2ste 11 Posted September 19, 2014 Wow! Thank you for the font names that saves me looking. Will have a go now. Thank you Share this post Link to post Share on other sites
wf2ste 11 Posted September 19, 2014 I have had a go in inkscape, here is what I did. Loaded the original without text into inkscape selected the image and went to path > trace (set it to colours and set 5) ungrouped and pulled the image apart Now it hasn't really seperated the different colours in the hands what should I do going forward? Share this post Link to post Share on other sites
skarekrow 1,842 Posted September 19, 2014 You could realign those pieces, make duplicates and punch them out with Path>Difference. OR Start over, retrace, and this time un-check the box on the bottom that says "Stack scans" Share this post Link to post Share on other sites
wf2ste 11 Posted September 19, 2014 I can't seem to get anything better than this Share this post Link to post Share on other sites
darcshadow 1,626 Posted September 19, 2014 I would suggest either trying to trace it manually using the bezier tool or pull the image into a photo editing program separate out the hands, darken them up, then trace the new image in inkscape and put the hands back together. Share this post Link to post Share on other sites
darcshadow 1,626 Posted September 19, 2014 Here's a ruff trace, needs some work. hands.svg Share this post Link to post Share on other sites