Rip_frannie 47 Posted August 8, 2014 got a new sublimation setup and started to doing small things for people I know and recently made a online store. let me kno what you guys think. 2 Share this post Link to post Share on other sites
suz1234 24 Posted August 8, 2014 Very nice and should do well especially with Christmas around the corner. Share this post Link to post Share on other sites
mr300s 1,272 Posted August 8, 2014 Good start , remember to use the best image you can get. I wouldn't have had the hole going threw the text on the plate and remember a lot of folks put those chrome borders around their plate and if the text is close to the edge it will be behind the chrome border... The plate looks like it has what I call dust that comes from either cheap sublimation plates or to long of a time usually 1 Share this post Link to post Share on other sites
Rip_frannie 47 Posted August 8, 2014 Thanks guys , I was doing like 90 seconds , I think it was to long. I also noticed if I clean the dog tags with alcohol, I don't get that look. Share this post Link to post Share on other sites
mr300s 1,272 Posted August 8, 2014 Yeah I would try one minute and go down from there 5 seconds at a time until you find the sweet spot 400 degrees med to firm pressure ... 1 Share this post Link to post Share on other sites
mr300s 1,272 Posted September 6, 2014 What I started doing and it works like a champ next one leave the protective film on it and as soon as its done peel right away. Need heat gloves its hot, no more what I call dust... 1 Share this post Link to post Share on other sites