panther60 0 Posted June 21, 2014 hi, for some reason when I go to use my signcut it is tell me that all tiles are deactivated, does anyone know how to fix this issue? thanks you in advance Share this post Link to post Share on other sites
Wildgoose 4,200 Posted June 21, 2014 while in the tiles menu there is a red X or a series of smaller x's denoting the tiles. You just use either of these to click on the tile you want to cut. Typically everything cuts and you will use the X to tell it to skip certain sections. There should be red X's though any tiles that are not going to cut. If you didn't set your vinyl size in the boxes on the main page the program will only let you cut what will fit within the parameters you entered. Some cutters will measure this for you most of the budget cutters you need to measure the distance between the pinch rollers and at least guess at the length of the roll and it will automatically tile anything that won't fit within that size. Share this post Link to post Share on other sites