TSR6 0 Posted March 31, 2008 I am working on my own race car number, and have both an outline around the number, and then a drop shadow all created in signblazer. The problem I am having is that the cutter will cut the outline & the shadow as two sepperate entities, when I really just want it to cut the entire black layer as one item. How do I go about doing this in signblazer? Share this post Link to post Share on other sites
TSR6 0 Posted March 31, 2008 tykite - give me a few hours, and I'll be able to post an example of what I'm working on. Basically I went and made a number with the Text tool. Then: Manipulate > Exapand/outline/inline > (Choose Outline, Keep Original, 0.00 offset & 0.03 thickness ) Then: Manipulate > Shadows.. > ( Shadow 1, Block shadow ) then set the shadow to be drop right shadow. When the cutter cuts, it will cut the outline & the shadow seperately Share this post Link to post Share on other sites
TSR6 0 Posted March 31, 2008 Would just a picture work? or do you want the blazer file? Share this post Link to post Share on other sites
Todd O 0 Posted March 31, 2008 Maybe I'm not following you right,but if you wanted the outline and shadow to be cut in the same color you could have made the shadow the same color as the outline,or just went back and made them the same color. if you are just wanting to cut 2 colors at once after you're in the cutter window,hold down the control key while you select the 2nd color. http://forum.uscutter.com/index.php/topic,1449.0.html Here's a link where Bruce explained how to cut more than 1 color at a time using the registration marks to line up your layers. Share this post Link to post Share on other sites
TSR6 0 Posted March 31, 2008 I couldn't look at the files - the forum wouldn't open them... but I do see the first two thumbnails. I understand it and am about to cut with the changes you gave me. ill let you know in 2 minutes if its what i needed (which i have no doubt it is ) Share this post Link to post Share on other sites
TSR6 0 Posted March 31, 2008 I got the images to download finally.. OK.. I'm pretty sure that those directions aren't going to work, unless I followed them wrong. That still went through and cut both the outline & the shadow. I really need to make the shadow and the outline both be "one" Attached is an image of what im trying to do... ( different font & style but same basic idea since i have SB DEMO on my laptop... and SB for cutting on my desktop thats not connected to the internet..) I only need/want it to cut around the outside of the black. I'll layer the yellow on top of that... Share this post Link to post Share on other sites
TSR6 0 Posted March 31, 2008 Im uploading a cell phone picture of the finished product right now... Share this post Link to post Share on other sites
TSR6 0 Posted March 31, 2008 This is it....but the black still has cuts for the outline within the shadow. Share this post Link to post Share on other sites
TSR6 0 Posted March 31, 2008 if you open the bigger file, you can barely see the cut lines in the black in the sun reflection.. Share this post Link to post Share on other sites
Todd O 0 Posted April 1, 2008 I'm with you now,I couldn't get them to weld,then I moved the 3 an the 6 out,selected the outline and shadow,weld,that got rid of the outside line of the outline,then just moved the 3 an 6 back in position,not sure if there is a easier way but it works. Share this post Link to post Share on other sites
TSR6 0 Posted April 1, 2008 I'm at home now, but I will have to try that in the morning and/or post the signblazer file from there. I'll be sure to bring a jump drive in the morning. Share this post Link to post Share on other sites
TSR6 0 Posted April 1, 2008 I'm at the shop. I'll have the signblazer file posted in a few minutes... Share this post Link to post Share on other sites
TSR6 0 Posted April 1, 2008 here it is 36outlineshadow.SBD 36outlineshadow.SBD Share this post Link to post Share on other sites
Countryside Graphics 0 Posted April 1, 2008 did u do a outline or inline and what was the settings on this? Share this post Link to post Share on other sites
TSR6 0 Posted April 1, 2008 Manipulate > Exapand/outline/inline > (Choose Outline, Keep Original, 0.00 offset & 0.03 thickness ) Manipulate > Shadows.. > ( Shadow 1, Block shadow ) then set the shadow to be drop right shadow. Share this post Link to post Share on other sites
Todd O 0 Posted April 1, 2008 The way I did it was move the 3 an 6 out of the shadow,selected the outline and shadow an clicked weld,moved the 3 an 6 back in position.I'm not sure if there is a easier way,I couldn't ever get just the outline and shadow selected til I moved the text out. Tykite was right on with the weld. 36...SBD 36...SBD Share this post Link to post Share on other sites
TSR6 0 Posted April 1, 2008 In about 20min, i'll check it out. I'm just taking a quick break from a multi-layer 28 x 15 project - so i cant close open the file right now. I would think there would be an easier way though... oh well. Share this post Link to post Share on other sites
Countryside Graphics 0 Posted April 2, 2008 Hey guys check this out how it looks. Oh just one question how can I change the black color to a different color? I have tried everything and it want let me hello.SBD hello.SBD Share this post Link to post Share on other sites
Todd O 0 Posted April 2, 2008 What color do you want it?Here it is red. Just select the black,when you got the black selected go to the bottom and click what color you want it. hello.SBD hello.SBD Share this post Link to post Share on other sites
TSR6 0 Posted April 2, 2008 Todd - Thanks!! That worked. I'll have to try your process on my file. I hate doing that though - there's gotta be an "easier" way than to move the numbers out of the shadow & outline... I'll post pictures once I get the car vinyled. It'll be within the next couple days. Share this post Link to post Share on other sites
Countryside Graphics 0 Posted April 2, 2008 what I am asking is how to change the black shadow say to a different color. I know how to change the front color Share this post Link to post Share on other sites
Countryside Graphics 0 Posted April 2, 2008 I cant get just the shadow to change it changes everything to a solid color when I change the color Is there something I am doing wrong there was a turitol the someone from signblazer did on this but cant seem to find it again. Share this post Link to post Share on other sites
Countryside Graphics 0 Posted April 2, 2008 Here you go see if it will change for you hello.SBD hello.SBD Share this post Link to post Share on other sites
Todd O 0 Posted April 2, 2008 You may have to take the outline and move it to the back if it's changing the whole image to the color you selected,or your not just getting the outline selected when your changing your color.You can click wireframe and see if just the outline changed colors or all of them changed. To put color to the back,click arrange,click put to back ,if it don't do like your wanting it to click undo until your back to where you started. Share this post Link to post Share on other sites