3fishdead 0 Posted November 17, 2006 How do i get 2 colors in my vinyl cut for a sticker?ex black and white Share this post Link to post Share on other sites
thredz 1 Posted November 17, 2006 When you are stting up the design.Put a small square box at the bottom of each corner of your color.Do that for every color you are doing,stacking the boxes on top of each other.That way you will have the boxes as registration marks to line up your colors when you apply them.I try not to put a lot of squeegee pressure over the boxes so they will be easier to peel off after I have set the colors. Bill Share this post Link to post Share on other sites
aspandmore 0 Posted November 19, 2006 Can I print directly from Corel Draw with my color seps using the Refine MH721? I tried bringing a custom eps file into Artcut and it was just a bunch of lines? I am brand new and I know nothing. Share this post Link to post Share on other sites
MarcelC 5 Posted November 20, 2006 Try checking these to forum topics for details on how to cut from Corel and Illustrator. http://uscutter.com/index.php?option=com_smf&Itemid=2&topic=10.0 http://uscutter.com/index.php?option=com_smf&Itemid=2&topic=39.0 Share this post Link to post Share on other sites
3fishdead 0 Posted November 21, 2006 Thank you bill but I don't get it ???Is their a video or other help? Share this post Link to post Share on other sites
thredz 1 Posted November 21, 2006 I'm sure there are videos out there.But I couldn't tell you where.I learned about registration marks from screen printing.I think they have some videos and tips at signwarehouse.com,but I don't have the link. Share this post Link to post Share on other sites
TaterNuts 3 Posted February 26, 2007 Video here http://uscutter.com/index.php?option=com_smf&Itemid=2&topic=191.0 As this will give you the general idea... Share this post Link to post Share on other sites