daynj 0 Posted April 29, 2014 Hi I have just purchased a PCUT CTO630. All of the operations are working on the control pad in "offline mode" but as soon as I set it to "online" and try to send it a command from the PC, the cutter LCD just displays "working laser" and nothing happens. How can I fix this problem? The software I have tried is SignCut Pro and SignBlazer. I have set up the cutter preferences how the tutorials have said to yet I still receive this problem and I cannot find a solution to it anywhere. I have tried it with both USB and serial connections. Thanks. Share this post Link to post Share on other sites
AdamN 0 Posted May 23, 2014 Hi, i see that you have posted regarding a different issue with this cutter since posting about the "working laser" issue so I assume you have managed to sort this, could you please post what the issue was, i'm having the same issue. Thanks, Adam. Share this post Link to post Share on other sites
reeves1985 2 Posted May 24, 2014 i am also having this issue i have double checked that the baud rate and comm ports match but still have no luck anybody have a solution Share this post Link to post Share on other sites
reeves1985 2 Posted May 25, 2014 I solved the problem I had to raise the baud rate in both device manager and signcut to (I think) 1480 and it worked 1 Share this post Link to post Share on other sites
AdamN 0 Posted May 25, 2014 Thanks, I guess I have some more settings to mess with, I got bored or trying different com settings last time Share this post Link to post Share on other sites
reeves1985 2 Posted June 1, 2014 I think that baud rate was wrong I set to 38400 and it works But I had the same issue and i was beginning my head against a brick wall and saw something somewhere regards the baud rate and it worked Although I don't have much luck using the cutter with signcut it always stops halfway through the job I have had more luck with signblazer elements which seems to work fine although the program itself is rather ugly and hard to navigate and get used to I wanted to use signcut because of the plugin for illustrator you can just export the design and that's it done with Signblazers a mess in that aspect Share this post Link to post Share on other sites