Sign in to follow this  
tyamp

silhouette design software

Recommended Posts

can silhouette design software be used with a cutter that is not a cameo? Im asking because i have a lot of stuff ready  to cut (made with silhouette) and my new software(scal3) is not as easy for me to use(yet). 

Share this post


Link to post
Share on other sites

I don't believe so.  You might try SignBlazer Elements software, I think it is more user friendly than SCALP.

  • Like 1

Share this post


Link to post
Share on other sites

Can the silhouette software export an .svg file? You could export it then cut it with SCALP.

  • Like 1

Share this post


Link to post
Share on other sites

Download and install SBE --  it handles *.dxf;*.eps;*.ai;*.bmp;*.tif;*.gif;*.pcx;*.tga;*.jpg;*.pcd;*.pct;*.psd;*.cmx;*.ps;  

(NOT .svg)

 

http://support.uscutter.com/index.php?/Knowledgebase/Article/GetAttachment/190/24198

 

I found this posting from another recent thread ---

Graphtec Studio, which is basically the same thing, can't export. I was googling a while back and found that you can install a PDF writing program and instead of cutting or saving your file, click print and select the PDF writer, which will make it create a PDF with your image inside. You can then open the PDF with inkscape and export the image as eps.

  • Like 1

Share this post


Link to post
Share on other sites
Download and install SBE --  it handles *.dxf;*.eps;*.ai;*.bmp;*.tif;*.gif;*.pcx;*.tga;*.jpg;*.pcd;*.pct;*.psd;*.cmx;*.ps;  

(NOT .svg)

 

http://support.uscutter.com/index.php?/Knowledgebase/Article/GetAttachment/190/24198

 

I found this posting from another recent thread ---

Graphtec Studio, which is basically the same thing, can't export. I was googling a while back and found that you can install a PDF writing program and instead of cutting or saving your file, click print and select the PDF writer, which will make it create a PDF with your image inside. You can then open the PDF with inkscape and export the image as ei dont see option for pdf writer

 

Download and install SBE --  it handles *.dxf;*.eps;*.ai;*.bmp;*.tif;*.gif;*.pcx;*.tga;*.jpg;*.pcd;*.pct;*.psd;*.cmx;*.ps;  

(NOT .svg)

 

http://support.uscutter.com/index.php?/Knowledgebase/Article/GetAttachment/190/24198

 

I found this posting from another recent thread ---

Graphtec Studio, which is basically the same thing, can't export. I was googling a while back and found that you can install a PDF writing program and instead of cutting or saving your file, click print and select the PDF writer, which will make it create a PDF with your image inside. You can then open the PDF with inkscape and export the image as eps.

i dont see option for pdf writer found it but inkscape???

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this