dmaff06 0 Posted February 23, 2014 hey guys, my names dan, have had an SC cutter for about 2 years now, but I just got around to opening it today. Everything with the assembly went great, now just gotta figure out how to install the driver on a mac system. Any insight would be greatly appreciated. dan Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted February 23, 2014 You should be able to follow the directions here. Choose your cutter, and follow the directions for set up. You should also activate the SCALP software, and make sure it has all the updates. http://start.uscutter.com/ Share this post Link to post Share on other sites
dmaff06 0 Posted February 23, 2014 You should be able to follow the directions here. Choose your cutter, and follow the directions for set up. You should also activate the SCALP software, and make sure it has all the updates. http://start.uscutter.com/ This was the first thing i did, Still nothing, and the SCALP is up to date but simply does not show my cutter as an option for print. Neither does it show form the help menu and install driver. Share this post Link to post Share on other sites
dmaff06 0 Posted February 23, 2014 These are the only Options for Driver installs that i have with this program. <a href="http://s586.photobucket.com/user/R-D-design/media/ScreenShot2014-02-22at100438PM_zps30524f39.png.html" target="_blank"><img src="http://i586.photobucket.com/albums/ss304/R-D-design/ScreenShot2014-02-22at100438PM_zps30524f39.png" border="0" alt=" photo ScreenShot2014-02-22at100438PM_zps30524f39.png"/></a> Share this post Link to post Share on other sites
dmaff06 0 Posted February 23, 2014 http://i586.photobucket.com/albums/ss304/R-D-design/ScreenShot2014-02-22at100438PM_zps30524f39.png Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted February 23, 2014 Did you restart your computer after downloading the drivers.. if not ,,,try it. Try one of the UScutter Copam or Laser point, and see if one of those will work. I don't have a MAC, so I know nothing there... Share this post Link to post Share on other sites
dmaff06 0 Posted February 23, 2014 Did you restart your computer after downloading the drivers.. if not ,,,try it. Try one of the UScutter Copam or Laser point, and see if one of those will work. I don't have a MAC, so I know nothing there... I did and still no luck with that. Nut when I clicked the "scissor" icon for cut. I was able to select the driver for my machine. Thank you for your help. I had a vey successful cut. I appreciate your time. Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted February 23, 2014 I did and still no luck with that. Nut when I clicked the "scissor" icon for cut. I was able to select the driver for my machine. Thank you for your help. I had a vey successful cut. I appreciate your time. Your welcome, that is what I was hoping for, that the machine would show up in your drop down list, after you restarted your computer.. Glad you got it. Share this post Link to post Share on other sites
mabscotthandyman 1,410 Posted February 23, 2014 Hello and welcome Dan from West Virginia. Dan Share this post Link to post Share on other sites
dwp99 283 Posted February 23, 2014 Hello and Welcome, glad you were able to get your plotter sorted out. Share this post Link to post Share on other sites
rlvied 292 Posted February 25, 2014 Hello and welcome Dan, also from Delaware Bob Share this post Link to post Share on other sites