motoxchic 33 Posted September 12, 2013 Anyone else have this issue? Once my 24" gets about 1/3 left, I can.not.push.it. I have a Big Squeegee that I usually use...(or sometimes the ol' paint trim guard with glued felt edge ) I hate wasting the last bit, but I am afraid I am going to wreck my graphic trying to squeeze out the last of the roll. I have like 3 or 4 of them laying around and need to order more. Having a hard time doing that!! Oh, and its the Greenstar layflat med tack. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted September 12, 2013 lay the application tape face up on the table and apply the graphic face down to it . . . . or make a roll holder for the end of your table Share this post Link to post Share on other sites
motoxchic 33 Posted September 12, 2013 AHH! I keep forgetting to try that trick. I could also try the roll holder, but my table can be dismantled so it may not stay put well. Thank you, I will try the upside down trick on some scrap and see how that works Might let me get to the end of these rolls anyway! Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted September 12, 2013 I still use it a LOT Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted September 12, 2013 Sometimes I get that also, on the larger rolls, I cut them down width wise, with a chop saw, and use those for smaller decals. Then you can finish out the roll, and your not wasting it. 3 Share this post Link to post Share on other sites
Jay2703 704 Posted September 12, 2013 Great tip Skeeter. Share this post Link to post Share on other sites
motoxchic 33 Posted September 12, 2013 Sometimes I get that also, on the larger rolls, I cut them down width wise, with a chop saw, and use those for smaller decals. Then you can finish out the roll, and your not wasting it. Great idea! (and I just ordered and 8" roll, which I will rarely use, but nice to have, lol). What type of saw blade do you use? I imagine a fine one? Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted September 12, 2013 I don't use a fine saw blade. I use the blade that came in my saw. Regular wood blade. , Zips right thru it. Share this post Link to post Share on other sites