Stuck On Gaming 0 Posted July 23, 2013 New to cutting. I looked on here for an answer and couldn't find it. I'm using a uscutter MH 14inch. The problem I'm having is when I send a project to the cutter it cuts perfect on the right side of the vinyl but on the left it starts overlapping cuts. If I were to cut for example "ABCDEFG" horizontally from end to end on the vinyl the letters "ABC" would be cut on top of each other and the "DEFG" would be perfect. Is it SCAL Pro or is it my cutter. I try cutting in origin mode and WYSIWYG and still the same result. Share this post Link to post Share on other sites
slice&dice 2,450 Posted July 23, 2013 What happens when you try the same series of letters using SIgnBlazer? If the use of another cutting software eliminates the issue, then you know it's the program SCALPro that's at fault. If not, and the problem persists, then you can check for some sort of glitch in the hardware. Share this post Link to post Share on other sites
Stuck On Gaming 0 Posted July 23, 2013 I only just started cutting. The only program I have is SCAL pro. It came with my cutter. Is SignBlazer free? Share this post Link to post Share on other sites
OWJones 1,981 Posted July 23, 2013 I only just started cutting. The only program I have is SCAL pro. It came with my cutter. Is SignBlazer free? Yes - this thread should provide you with everything you need - http://forum.uscutter.com/index.php?/topic/20104-full-version-signblazer-download-all-cutters/ Share this post Link to post Share on other sites
slice&dice 2,450 Posted July 23, 2013 USCUTTER provides it for download, the software is abandonware. http://support.uscutter.com/index.php?/Knowledgebase/Article/View/190/27/01-signblazer-elements Share this post Link to post Share on other sites
MadHatterGraphix 1,258 Posted July 23, 2013 I believe uncheck the wysiwyg I had issues and unclicked that and it worked. Share this post Link to post Share on other sites
Stuck On Gaming 0 Posted July 24, 2013 Called uscutter tried to trouble shoot and also tried using Sign Blazer and still getting the same result. Uscutter thinks it's the motherboard on the cutter. Going to try using my desktop (Windows Vista) instead of my laptop (Windows 7). If anyone else has a suggestion I'll give it a try. Share this post Link to post Share on other sites
Stuck On Gaming 0 Posted July 27, 2013 Figured out what the problem was. I was setting up my workspace on my computer to 12 inches because that's the size vinyl I was using. The machine is only capable of working in a 10 inch wide area. Every time it would go to the left it would reset the boundaries and cut/plot lines on top of each other. Share this post Link to post Share on other sites