dave78

Annoying weeding frame problem.

Recommended Posts

Hi,

 

All of a sudden every time I cut a design and use the weeding frame option the frame cuts through the end of the design on 1 side instead of going around it.

 

Any ideas??

Share this post


Link to post
Share on other sites

I use Flexi so I'm not sure but I'm sure someone will be along that can help.

Share this post


Link to post
Share on other sites

It's been a while since I used it but there's a setting for the distance between the weeding frame and the graphic somewhere.

Share this post


Link to post
Share on other sites

I always do a preview and watch the little knife go around so I don't waste vinyl. Not that that will help you figure out whats going wrong but might help prevent a screw-up. I have never had anything like that happen. SignCut has decent  tech support. You might have to get in touch with them.

  • Like 1

Share this post


Link to post
Share on other sites

I have had that same problem before. I am not sure what causes it but i always also check the preview before i cut it. For me, it would always show it in the preview so i caught it beforehand most of the time. I hardly ever use the weeding frame anyway.

Share this post


Link to post
Share on other sites

I've had this problem as well on large cuts or long roll out cuts. I usually disable that feature and if I need a weed frame I create my own.

Share this post


Link to post
Share on other sites
Hi,

 

All of a sudden every time I cut a design and use the weeding frame option the frame cuts through the end of the design on 1 side instead of going around it.

 

Any ideas??

Hi.

Did you get this solved? If not you can come to our livechat at www.signcutpro.com and we will help you solve this.

Regards,

Therese Löfström

Whisqu Graphic AB

SignCut Sweden

_______________________________________________________________________________

Start-up guide: http://www.signcutpro.com/files/pdf/startup_guide.pdf

Download Signcut - http://www.signcutpro.com/download-signcut-productivity-pro/

Purchase/Renew - www.signcutpro.com/webshop/

To keep yourself updated

Please visit our Facebook page http://www.facebook.com/SignCutpro

or follow us at twitter: https://twitter.com/signcut

  • Like 1

Share this post


Link to post
Share on other sites

Hi.

Did you get this solved? If not you can come to our livechat at www.signcutpro.com and we will help you solve this.

Regards,

Therese Löfström

Whisqu Graphic AB

SignCut Sweden

_______________________________________________________________________________

Start-up guide: http://www.signcutpro.com/files/pdf/startup_guide.pdf

Download Signcut - http://www.signcutpro.com/download-signcut-productivity-pro/

Purchase/Renew - www.signcutpro.com/webshop/

To keep yourself updated

Please visit our Facebook page http://www.facebook.com/SignCutpro

or follow us at twitter: https://twitter.com/signcut

Hey see that? That's what I call tech support, I guess I'll have to bump it up from decent to great. How often do you get a techie who actually shows up on the forums to help out. Not very. Way to go SignCut! I bought a new Summa a few months ago and they busted out a new driver for me in short order to get me up and running (which as I understand it Summa is a bit different so was a challenge).

  • Like 3

Share this post


Link to post
Share on other sites

I think they took a hit when uscutter stopped bundling the signcut license and switched to scalp. Nice to see the are around and helping which is more than can be said for Craft Edge w/ the scalp product line.

  • Like 1

Share this post


Link to post
Share on other sites

Hi,

Thank you for your posts. We have done a lot of changes in our company during the last year. One of the things I'm doing as head of the support is to try to be active in as many places as possible. What I like with this forum is the kindness you customers show each other and your will to help each other solving problems even if you don't know each other. As I said before in a post I made here "The key to success is satisfied customers" and that it what I and our company strive for. :)


Regards,

Therese Löfström

Whisqu Graphic AB
SignCut Sweden

 

  • Like 1

Share this post


Link to post
Share on other sites
Coming from a newbie but I hate Sure cuts alot

You have to pay for SignCut but I'm here to tell you it's well worth it. You will need to design on some other program and then SignCut is a cutting utility that is about the only cross platform (Mac and Windows) program out there and it has all the bells and whistles for cutting. 

Share this post


Link to post
Share on other sites


Skarekrow turned me on to Vinyl Master Pro. I downloaded the trail and love it so far. Its a all in one. Seems to be awesome so far, I think I will buy it. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now