Cutter cutting more than its supposed to

[Ericjgidney 0]

I have an sc model and everything was working great on it for several months until today. I am trying to cut an 11x11 image and the machine keeps making two or three passes over what was originally cut and is cutting more than its supposed to. I cut this project a couple of days ago with no issues problem just started today. Closed that project and decided to try a different project that I have done before and am recieving the same problem. When reviewing the project in the program everything looks fine. Cutting preview looks right however the cutting preview and the end result are nothin alike. Going to uninstall the program and reinstall it and see if that helps and am running it by serial not USB. Thanks for any help I can get.

[slice&dice 2,450]

What program?

[Ericjgidney 0]

Sure cuts a lot

[slice&dice 2,450]

That might be your problem right there.

 

It's unlikely to be a glitch in the SC itself.

[egobuster1 9]

there is a option in the cut screen on SCAL to make multiple passes make sure thats not turned on

[DecalOriented 6]

Probably duplicate paths. What are you designing with?