Rachaelrt0123 0 Posted April 14, 2013 I have a 1985 Subaru Brat that I just bought and I need the graphic that goes up and around the top. Thank you! Rachael Share this post Link to post Share on other sites
MadHatterGraphix 1,258 Posted April 14, 2013 That should be easy to recreate in a drawing program. Share this post Link to post Share on other sites
mb20music 760 Posted April 14, 2013 That should be easy to recreate in a drawing program. Doesn't look that easy to me, especially since it wraps around the top of the vehicle. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted April 14, 2013 To get that curve right across the top of the vehicle you could do a full decal rubbing and trace it from that - place a lightweight paper over the entire decal side to side and rub the edges with a pencil - trace it with a sharpie - take a good straight on shot with a camera, trace it in you vector program of choice or send it to excalibar - then you will have an accurate copy that will follow the curves of the vehicle Share this post Link to post Share on other sites
Coaster36 327 Posted April 14, 2013 Never heard of that before good idea dakota. Wouldnt it be easier to do half thought? Just mirror the image. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted April 14, 2013 Never heard of that before good idea dakota. Wouldnt it be easier to do half thought? Just mirror the image. yes that would work. . . the trace is an old school form of making duplicates of existing work Share this post Link to post Share on other sites
Coaster36 327 Posted April 14, 2013 Ill have to remember that one. Share this post Link to post Share on other sites