LLaurence 12 Posted April 8, 2013 So when I first bought this cutter it was great and ran through thoroughly no problems. Until about a week ago. Every time I send things to my cutter now it just pauses randomly like it is thinking what to do next. I would say it does it every 15-30 seconds during the cut. Is this normal? A glitch maybe? A warning sign on a malfunction? Any one else experience this problem? Have a solution? Share this post Link to post Share on other sites
BannerJohn 1,324 Posted April 8, 2013 unplug it for a few minutes so it will clear the memory and try it.I had one do this once and I had to do that every day or two. Share this post Link to post Share on other sites
LLaurence 12 Posted April 9, 2013 I just tried ..... its still doing it. . is there any other way to clear the memory Share this post Link to post Share on other sites
slice&dice 2,450 Posted April 9, 2013 What cutting software are you using? Share this post Link to post Share on other sites
LLaurence 12 Posted April 9, 2013 I use Photoshop and then SCALpro. But it never used to do this. Share this post Link to post Share on other sites
slice&dice 2,450 Posted April 9, 2013 If you want to eliminate the possibility of the cutter being at fault, download & install SignBlazerElements and use that to cut, and see if the machine still hangs. If not, then you have a SCALPRO issue. http://www.mystat.com/Signblazer.zip (install v6 first, then the UK version, and apply the Patch to eliminate the nagging start-up screens) Share this post Link to post Share on other sites