Badfish77 2 Posted December 29, 2012 I have made progress since the other thread, and should have a sleeve machined by the end of the holiday that will adapt a sharpie to fit in the laserpoint I. The best I can tell, all the holders for the USC entry machines have slightly differant specs, but support didn't seem to know what they were. Can some of you provide some accurate measurements of the blade or pen holders for your machines? Or maybe someone who's been around longer can help me find them. What I need is the distance from the tip to the bottom of the shoulder that sits on the arm. I see the diameter of the plotting pen in my user manual, and will DL the others to check, but if you could provide that just to confirm it would be great. Another member has shown interst, and should be getting me dimensions for the laserpoint II. Much thanks in advance Pete 2 Share this post Link to post Share on other sites