military unit crest help

[integra90racer 0]

i have a gif of 145th medical batallion unit crest that ive been trying to vectorize and no luck ... its the only one i have found any help would be appreciated its for my units front door

god bless

[AbsoluteAirbrush 33]

what issues are you having when you vector it? And don't vector the text if you are, you'll have to recreate that.

[integra90racer 0]

all the lines are out of order it seems like it doesnt even trace the item correctly im not sure if i am doing it correctly or not im using corel x6... I didnt know that about the letters but it makes sense

[AbsoluteAirbrush 33]

I use inkscape, but I'd post the source pic and the result when you vector so everyone can see what's going on...

[integra90racer 0]

so here is what happens when i attempt it

[Sue2 920]

This is one that would be better to just re-draw rather than trace.

Your graphic is very low resolution so trace will not go well.

The crest is a repeat pattern...all you have to do is create one section.

Then copy and rotate. Then ad the bottom curve and text.

Attached is a 3 minute re-creation in Corel of one segment.

Sue2

Crest-Start.eps

[integra90racer 0]

thank you this helps alot im going to attempt this more i havent had alot of experience with corel draw

[Sue2 920]

thank you this helps alot im going to attempt this more i havent had alot of experience with corel draw

Taking the time to learn how to do this yourself will be well worth it

in the end.

Yes, you can pay someone else to do it or you can beg for some

kind soul here to be generous.....but you are at their mercy as to time.

Somethimes you have to have it NOW and only NOW will work....

then you have to do it yourself.

Good learning,

Sue2

[Big Fran 10]

Here's what I whipped up...145th.eps

[integra90racer 0]

thank you very much sorry for the late post military duties