bagmania01 0 Posted August 5, 2012 Hello.. I've had a Refine MH721 for about 3 or 4 years and just now starting to get a little serious about using it. Also, I'm using Signblazer Elements. Everything works great all the time execpt for one thing and I'm sure I'm not doing something I should be doing... The problem is that when I tell it to start cutting I never know when the plotter is going just start cutting or roll the vinyl back and then start. How do I tell what it's going to do, or what do I need to do to make it do one or the other. Thanks for any help you can give me. Thanks Rick Share this post Link to post Share on other sites
cowboy_1_831 28 Posted August 6, 2012 If you push the origin button on the machine it will start where its at. Share this post Link to post Share on other sites
Jay2703 704 Posted August 6, 2012 In the cutter setup screen, make sure that "Pre-Feed vinyl" isn't checked. Share this post Link to post Share on other sites