joshlindt 2 Posted February 23, 2008 im figuring that some of this free dtuff is 15 inch and my cutter will only take 14" and was wondering if anyone has any suggestions of what to use or how to cut the whole roll down Share this post Link to post Share on other sites
SmallSigns 23 Posted February 23, 2008 I saw a website where the guy used a chop saw and had great results. I was going to try that on a 36" roll I got for a sample. Share this post Link to post Share on other sites
joshlindt 2 Posted February 23, 2008 ill give it a try i was also thinking maybe a band saw with lots of teeth Share this post Link to post Share on other sites
SmallSigns 23 Posted February 23, 2008 Band saw will also work -- just gotta keep it straight. no matter the way you cut it -- make sure it is wound tight to prevent tearing. Share this post Link to post Share on other sites
stew 0 Posted February 24, 2008 Here you go, http://www.digital-graphica.com/tuts/cut_rolls/ Share this post Link to post Share on other sites
Daniel T 0 Posted February 24, 2008 thank you!!!!! good info. Share this post Link to post Share on other sites
joshlindt 2 Posted February 24, 2008 thanks ill give it a try when some of the free rolls get here Share this post Link to post Share on other sites
SmallSigns 23 Posted February 24, 2008 Thanks Stew -- I knew I saw it somewhere! Share this post Link to post Share on other sites
ThermoPuke 0 Posted March 3, 2008 Just curious, where did you get a sample of 36" I want one Share this post Link to post Share on other sites
bk2design 1 Posted March 3, 2008 Check the vinyl section Thermopuke, there's a few links to free materials. Share this post Link to post Share on other sites