spdorsey 0 Posted June 12, 2012 I purchased an MH721 from Amazon, and I look forward to the headaches of setting it up and the fun of cutting my own decals and designs. Hello all! Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted June 12, 2012 Hello from Indiana, Here is where you can start. Good luck http://start.uscutter.com/ Share this post Link to post Share on other sites
mabscotthandyman 1,410 Posted June 12, 2012 Hello and welcome Dan Share this post Link to post Share on other sites
slice&dice 2,450 Posted June 13, 2012 Congratulations, and welcome to our little forum. Last year, I opened a small sign-making store with the MH871 (34" version of the MH721) and it didn't give me a single headache out of the box. I literally went from setting it up to cutting within minutes, using SignBlazer. The only two things that are absolutely needed to reduce any glitches: 1. GROUND the machine to the stand. 2. Keep your cut lengths under 12-feet or so (with USB) I would be curious to know what agguilar meant by saying "it's very naughty" --- what specific issues do you have, that leads you to say there are 10,000 headaches to endure? (sorry for hijacking this thread, but maybe there will be some information agguilar can share which assists all users of the MH series cutters) Share this post Link to post Share on other sites
vicsign 5 Posted June 15, 2012 Hello. Hope I can help you install the plotter with stand first. link the plotter with PC, install the software and driver. open the software and setting the port. finally, start to cut your decals. Leon. Share this post Link to post Share on other sites