Saying g'day and asking my first Question

[AusStretch 0]

Hello to all here.

I'm an Aussie guy who has spent the last 29 years caring for my quadriplegic son.

I needed to do something for myself, so I bought myself some gear and now am doing T-shirt design and printing as a hobby / small time home business.

Still looking after my boy, but needed some ME time lol.

I have a Refine EH721 cutter that is working fine with FlexiSign 8.1

I know I should have opted for a cutter with optical registration for contour cutting (live and learn) but is there any way that I can use the eh721 to do this type of work?

Ive tried a few things and can never get the registration right.

Being on a carers pension it might be a while before I can get enough cash together for another cutter, any assistance with my problems would be gratefully received

[MZ SKEETER 4,708]

Welcome You can probably get your cutter to work with Flexistarter10 with contour cutting.. The software does not require a laser, it measures from the blade in the middle of the registration mark. And jogs to each registration mark.

Here is an Ebay ad. Your cutter is supported Xpert EH721 You can get it most times for around $129.00 if you keep watching the ads.

http://www.ebay.com/...=item4156f01a51

[AusStretch 0]

Hi Skeeter.

Thanks for the welcome and the advice re Flexistarter10.

I'll have to have a good look at it and keep my eye on the prices.

Thanks again

[MZ SKEETER 4,708]

your welcome , hope things work out for you...

[mabscotthandyman 1,410]

Hello and welcome from West Virginia .

Dan