Jag 0 Posted February 7, 2012 Hello everyone, I got my cutter five days ago and I still cannot get it to cut. I have downloaded every driver numerous times. I am using the keypan adapter. My computer recognizes the serial port. The baud rate matches. The correct cutter is listed in signcut. All to no avail. When I click "cut", signcut freezes with an "Estimated Time: Unknown". I have switched between the two different ports, neither solving any issues. Here is a screenshot: And here is the list of drivers I have installed numerous times: Driver for UPR-112G, USA-49WG, USA-28XG & USA-19HS (Mac OS X 10.6.x) Beta Driver for UPR-112G, USA-49WG, USA-28XG & USA-19HS (Mac OS X Lion - 10.7.x) Download FTDI driver for Mac OSX 32 bit Download FTDI driver for Mac OSX 64 bit I have OSX Lion, Intel core 2 duo, and an MH MK 34" cutter. I've read just about everything this forum has to offer, including the "easy set ups". Any help would be much appreciated. Share this post Link to post Share on other sites
minus1clothing 0 Posted August 24, 2012 Did you ever get your cutter to work? I am having the same issues with the same cutter. I got it to work by selecting the Roland PNC 1000 but if my image is over a certain size, the cutter just starts making random cuts about half way through the design. Share this post Link to post Share on other sites
strycnine 23 Posted August 26, 2012 I had trouble with my MH MK2 14" and had to re-install Signcut. Share this post Link to post Share on other sites
egobuster1 9 Posted September 3, 2012 my cutter did the same thing and havent had time since to mess with it Share this post Link to post Share on other sites