Outline of lames

[22 2]

I'm looking for the outline of some flames. I've got plenty of just flames but I'm just wanting to cut the outline of some flames. Don't need them filled in.

[mb20music 760]

you can make outlines of the flames you already have very easily, what software do you have? Do you have SignBlazer?

[22 2]

How would I do this through sign blazer? Sorry I only do this for my own hobbies.

[acehole 1]

To outline in signblazer select the object (your flame) go to the manipulate tab at the top of the screen then select expand/outline/inline play with the settings till you get what you want alt+backspace will take you back one step so you can keep trying till youre happy with results

[22 2]

Well thanks for the tip, unfortunately its not detailed enough for what I really want. Seems to make a blob of it.

Trying to do this on a project of mine

http://th01.deviantart.net/fs43/300W/f/2009/059/3/c/Flames_outline_by_MuffinofDeath.jpg

[22 2]

Thought I would bump this up, Still looking. Like I said this is for a project of my own, I'm a professional by no means.

[Bigmac 1]

What type of files do you have, eps, jpeg, ?

[Jay2703 704]

Well thanks for the tip, unfortunately its not detailed enough for what I really want. Seems to make a blob of it.

Trying to do this on a project of mine

http://th01.devianta...ffinofDeath.jpg

Reduce the offset value.

[22 2]

.eps

[Jay2703 704]

.eps

Post the .eps so we can see what you are doiing.