intelligentleman 0 Posted August 13, 2011 Hi, all. HELP ME, PLEASE! I beg of you!! XD I recently bought a 34 inch US Cutter MH871-MK2 with a 34 inch bed. My feed rollers are not working. It has nothing to do with the software, because they won't even move when I attempt to test cut. Everything else seems to be fully functional. Any ideas? Share this post Link to post Share on other sites
deth502 39 Posted August 13, 2011 they are belt driven. my guess would be the belt is off/broken. should be behind the left side cover. Share this post Link to post Share on other sites
intelligentleman 0 Posted August 13, 2011 Ok I'll check it, and let you know what happens. Thank you. Share this post Link to post Share on other sites
intelligentleman 0 Posted August 13, 2011 Ok, I opened her up, and the belt is perfectly in place. What's going on? Share this post Link to post Share on other sites
deth502 39 Posted August 13, 2011 no more ideas. being that everything else is working, i thought it might be that. maybe the stepper motor? did you make sure it was plugged in? on both ends? just guessing. id think if it were a motherboard or chip, nothing would work. Share this post Link to post Share on other sites
