eharris 0 Posted July 24, 2011 In Signblazer Element after I vectorize image not all of the image has nodes. How do you add a node section without attaching to another node? Like maybe the eyebrow is not vectorized how do I do just that area without attaching to close node? Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted July 24, 2011 can't answer your question on Signblazer, but inkscape vectorizes much better and is FREE inkscape.org Vectorising in Inkscape Posted by Levi Hartzog on 16 January 2009 02:31 PM This walk through explains the basics of vectorising in Inkscape. Step 1) Import your image. Click File>Import, find your file and click OK. Step 2) Select the image, go to the top of the screen, click Path>Trace Bitmap. Step 3) The Trace Bitmap menu will then open. Here you can select how you want your image vectorised and adjust the settings. You can also generate a preview. Once you are happy with the preview click OK and close the Trace Bitmap screen. Step 4) Now you will have your new vector image and the old raster (bitmap, jpeg, gif etc) image stacked on top of each other. Seperate the two and delete the raster. Step 5) Play around with your new vector image! Share this post Link to post Share on other sites
boosted 2 Posted July 26, 2011 right click on the line where you want the node, click add. Share this post Link to post Share on other sites