Jump to content


Photo
- - - - -

LXI Master Plus vs FlexiSign Pro


  • Please log in to reply
7 replies to this topic

#1 RMDelete

RMDelete

    Advanced Member

  • Members
  • PipPipPip
  • 51 posts

Posted 16 July 2011 - 04:21 PM

My dilema started with finding software that would be compatible with my Craft Robo Pro

Apparently my FlexiSign Pro is outdated 8.1v1 so it didn't have the necessary drivers to run my new plotter. Well then I went forth to purchase FlexiSTARTER 8.6 because it had my drivers... now I have a vendor offering me to sell me their friend's version of LXI Master Plus V10 for only about $100 bucks, I have heard that LXI is similar to Flexi but was wondering HOW similar they are? 80%??? what are the major differences between these softwares because I almost feel like purchasing the LXI if it IS like FlexiSign Pro it may just be worth it for me, but I love flexi and am almost afraid of purchasing something that will not even be as good, even if it's a steal. (not even sure how much LXI 10 runs for right now) so I told the vendor I would get back to him after doing a bit of homework, so if someone out there already has the answer could you please lend me your advice or points of views on these two softwares and whether or not I would be making a good decision on getting myself LXI 10? I appreciate the help guys!

#2 2CT Media LLC

2CT Media LLC

    Advanced Member

  • Members
  • PipPipPip
  • 258 posts
  • LocationSan Tan Valley, Arizona

Posted 17 July 2011 - 10:49 AM

They are the same, the only difference is there are changes to the designing side of the two programs. LXI has less features.

LXI Features

Christian De Ramos

2CT Media, LLC

Office (480) 269-7585, sales@2ctmedia.com
We offer to the trade printing & Installations
Hardware: HP L26500 61" Latex, Geo Knight 16"x20" DK20A press
Software: ONYX X10.1 Postershop, Corel Suite X6, and Adobe Suite CS5


#3 mopar691

mopar691

    Advanced Member

  • Members
  • PipPipPip
  • 982 posts
  • LocationHickville

Posted 17 July 2011 - 11:05 AM

I dont think LXI offers any RIP. ????? But I could be wrong. Running just a plotter would not see any differance but with printing this would be a issue for me.

#4 roxanneupnorth

roxanneupnorth

    Advanced Member

  • Members
  • PipPipPip
  • 1,154 posts
  • LocationIn Canada

Posted 17 July 2011 - 11:11 AM

For 100.00?.....That is way low....This software is 2,295.00 on Sign Warehouse's website.....
"Sooner or later I will piss you off, so when necessary, please ignore me!"

#5 2CT Media LLC

2CT Media LLC

    Advanced Member

  • Members
  • PipPipPip
  • 258 posts
  • LocationSan Tan Valley, Arizona

Posted 17 July 2011 - 11:12 AM

It does offer RIP, I attached the version spec sheet.

Christian De Ramos

2CT Media, LLC

Office (480) 269-7585, sales@2ctmedia.com
We offer to the trade printing & Installations
Hardware: HP L26500 61" Latex, Geo Knight 16"x20" DK20A press
Software: ONYX X10.1 Postershop, Corel Suite X6, and Adobe Suite CS5


#6 Rodger

Rodger

    Mr Karma

  • Members
  • PipPipPip
  • 6,175 posts
  • LocationUSC Super Hog Crownsville Md , Weston West Virginia or Deer Lodge Tn

Posted 17 July 2011 - 11:50 AM

For 100.00?.....That is way low....This software is 2,295.00 on Sign Warehouse's website.....



Well Roxy , the OP did descibe it as a " steal " :D for $100 .
I am your Sunshine , your only Sunshine , I make you happy when skies are gray ...

#7 Mz SKEETER

Mz SKEETER

    Advanced Member

  • Members
  • PipPipPip
  • 10,242 posts

Posted 17 July 2011 - 01:19 PM

My dilema started with finding software that would be compatible with my Craft Robo Pro

Apparently my FlexiSign Pro is outdated 8.1v1 so it didn't have the necessary drivers to run my new plotter. Well then I went forth to purchase FlexiSTARTER 8.6 because it had my drivers... now I have a vendor offering me to sell me their friend's version of LXI Master Plus V10 for only about $100 bucks, I have heard that LXI is similar to Flexi but was wondering HOW similar they are? 80%??? what are the major differences between these softwares because I almost feel like purchasing the LXI if it IS like FlexiSign Pro it may just be worth it for me, but I love flexi and am almost afraid of purchasing something that will not even be as good, even if it's a steal. (not even sure how much LXI 10 runs for right now) so I told the vendor I would get back to him after doing a bit of homework, so if someone out there already has the answer could you please lend me your advice or points of views on these two softwares and whether or not I would be making a good decision on getting myself LXI 10? I appreciate the help guys!



make sure it has the USB dongle with it... that proves it is REAL LXI software and not some copy/pirated/cracked software. The USB dongle has the password for REAL versions.
Graphtec FC7000MK2-75 Flexistarter 8.5/8.6 Toshiba laptop Windows XP, Toshiba laptop Windows 7, Flexisigndesigner10

#8 Frosted Images

Frosted Images

    Advanced Member

  • Members
  • PipPipPip
  • 167 posts
  • LocationJacksonville Florida

Posted 18 July 2011 - 06:36 AM

Hey man...that is a steal. You can not get FlexiStarter for that. Make sure it has a dongle. LXi and Flexi doesn't have that much difference.
Gateway Notebook 32 Bit Vista, Toshiba Notebook 32 Bit Windows XP Pro, Vinyl Master Pro 2.95v, FlexiSign Pro 8.1v, CorelDraw X4, Adobe Master Suite CS3 with Cutting Master 2, Graphtec FC8000-75, US Cutters Auto Open Clam Press, and Epilog Legend 36 EXT 60 watt Laser with Rotary, and Epson 1400.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users