tservice

cutting strip replacement

Recommended Posts

I have replaced my cutting strip. I used two sided tape to adhere the strip. A week later it is popping up. grrrrrrrrrrrrrrrrrrrrrrrrr

What should I use to apply the strip?

Thanks

Share this post


Link to post
Share on other sites

you can scrape any raised plastic from gouges off of your cutting strip & put some reflective tape on it . works great . You can get a new strip or keep some reflective around .

Share this post


Link to post
Share on other sites

I have a new strip that I ordered from uscutter. But it didn't come with any adhesive. So my problem is I used 2 sided tape scotch brand. and it holds for a short period of time, them starts peeling itself off. I need to know what I can use to reapply it.

Share this post


Link to post
Share on other sites

You mentioned that you used Scotch brand double sided tape. If you used the standard tape from the roll, that is not strong enough for the cutting strip. Stop by a large Craft store and pick up some heavy duty double sided craft tape. It is much stronger than the standard tape. Also, lay out the new cutting strip so it flattens out and has no curve in it before applying. Hope this helps. Arty

Share this post


Link to post
Share on other sites

thanks i will try that. :D

I use banner hem tape. That stuff will hold it.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now