CocoVee 0 Posted March 19, 2011 Has anyone ever tightened the carrier slot where the blade holder fits and it cracked? I slipped the blade holder in the slot and tightened and it cracked on the outside. Do I have to replace the whole thing? I am able to place the blade holder in the slot and tighten to where it is pretty secure but not sure if that is why when I cut a design, there are some areas that cut clean through and other areas that don't cut through at all. Any help is appreciated. Newbie here. Sharon Had to change the first question to make sense. 1 Share this post Link to post Share on other sites
BannerJohn 1,324 Posted March 19, 2011 http://www.uscutter.com/US-Cutter-MH-Carriage-_p_10.html you could try a little super glue... call USC MOnday and ask.....some cutters you can replace just the part that broke but they don't list it. Share this post Link to post Share on other sites
CocoVee 0 Posted March 19, 2011 http://www.uscutter.com/US-Cutter-MH-Carriage-_p_10.html you could try a little super glue... call USC MOnday and ask.....some cutters you can replace just the part that broke but they don't list it. I may just try the super glue, but I will call them on Monday. Thanks for your reply. Share this post Link to post Share on other sites