Kelmo66 1 Posted January 9, 2018 I Give up. Replaced the Mother Board also and blade still will not lift up. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted January 9, 2018 20 minutes ago, Kelmo66 said: I Give up. Replaced the Mother Board also and blade still will not lift up. could be a bad solenoid in the carriage - can test with a 9 v battery as described elsewhere in the forum by the time you chase it down you will have spent a good amount toward a sc2 - much better cutter IMHO Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted January 9, 2018 24 minutes ago, Kelmo66 said: I Give up. Replaced the Mother Board also and blade still will not lift up. if solenoid then the entire carriage is only $32 pretty impressive you got the mainboard next day Share this post Link to post Share on other sites
Kelmo66 1 Posted January 10, 2018 I agree probably a good idea to upgrade now. I did replace the entire carriage with the solenoid. US cutter techs are helping me trouble shoot further but I'm currently looking into another cutter. Share this post Link to post Share on other sites