silvertrx 0 Posted August 15, 2010 Im using signblazer with a pcut ct630 and every time i do some words in edwardian script, everytime i cut it or view the outline, where the letters join instead of continuing itmarks each letter leaving little circles. How to i stop this? any ideas Share this post Link to post Share on other sites
pyrophire 0 Posted August 16, 2010 you need to merge everything into a single path so there are no overlaps Share this post Link to post Share on other sites
mr300s 1,272 Posted August 16, 2010 Just put it in wire frame then hit weld and you will see it fixed. Hope this helps Go to view then outline/wireframe, then go to arrange and weld total weld Share this post Link to post Share on other sites
warrior35 2 Posted August 16, 2010 I don't even think you have to put it in wireframe do you? Just "arrange" and the "weld" "total weld" Share this post Link to post Share on other sites
mr300s 1,272 Posted August 16, 2010 I don't even think you have to put it in wireframe do you? Just "arrange" and the "weld" "total weld" no you don't you can just see the change easier thats all Share this post Link to post Share on other sites