Sign in to follow this  
kboyte

help with welding letters--if possible

Recommended Posts

I need help or instruction on welding the letters STATE CHAMPS in the banner.  When I cut this with my cutter it is cutting out the outline in the banner.  I am wanting it to combine the outside of the letters to the banner and only cut out the inside of the letters. 

Hope this is not too confusing.

Thanks

Kim

state champs.EPS

state champs.EPS

Share this post


Link to post
Share on other sites

First thing u need to do is move the letters closer so they touch each other.

Then weld the letters -outline-place over banner where u want it weld the whole thing.

Should work.

mark-s

Share this post


Link to post
Share on other sites

Ok, I'll try that.  Cutting software- signblazer. I also work in Corel x4 and Inkscape.

Share this post


Link to post
Share on other sites

If it was me I`d start all over again.

There are alot of double lines which will hinder u in the welding.

And alot of broken lines that don`t help.

I redid the word state.This is what it should look like.

mark-s

post-1351-12986555950531_thumb.jpg

post-1351-12986555971718_thumb.jpg

Share this post


Link to post
Share on other sites

Here is another copy that I have worked on.  I started over, outlined and welded.  When I used Corel weld it welded everything was black.  No white on the State Champs.  I got it to work correct (I think) in signblazer.  Let me know how this looks or do I still have double lines and broken lines. 

thanks for any help

Kim

state champs.EPS

state champs.EPS

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this