Sublime 0 Posted July 13, 2010 I have a CP-2500, the older model without the USB port so im using the Serial to USB adapter as i dont have a LPT port on my laptop. I Installed it on a 32bit Vista Laptop, It shows up in the device manager and says its using COM6, I configured it in SignCut, Made sure it was using COM6, but when i send a job to the plotter to cut, i get no responce at all. I get the same situation while using Sign Blazer as well. I tried the plotter on an older laptop running XP using an LPT cable and it worked first shot. However after cutting 3 things, any time i sent a job to the plotter, the vinyl would just move foward an inch and then there would be no other movement, So how can i get my plotter to work on my Vista laptop and what is the reason it stopped cutting on the 2nd laptop? Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted July 13, 2010 have you gone thru the instructions in the user manual for setting up? http://support.uscutter.com/index.php?_m=downloads&_a=viewdownload&downloaditemid=55&nav=0 Share this post Link to post Share on other sites
Sublime 0 Posted July 13, 2010 have you gone thru the instructions in the user manual for setting up? http://support.uscutter.com/index.php?_m=downloads&_a=viewdownload&downloaditemid=55&nav=0 Yes i have, followed them exactly. And i just realised i posted this in the wrong forum, should have been in the Copam Support forum Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted July 13, 2010 then submit a ticket and see if UsCutter can help you out http://support.uscutter.com/index.php?_m=tickets&_a=submit Share this post Link to post Share on other sites
YadirellT 0 Posted July 13, 2010 If you're using a 9 pin serial adapter to USB, then make sure you're using a Null Modem cable for the Copam. Additionally, do you know what kind of adapter you're using? Brand, model number? Speedy is right though, submit a ticket, and we'll have a tech work on this with you. Share this post Link to post Share on other sites
Sublime 0 Posted July 13, 2010 Thanks for the help guys, but i got it working late last night, I had an issue with conflicting drivers. Share this post Link to post Share on other sites