FutureSgtsWife 0 Posted June 28, 2010 I know this is probably the dumbest question -- and I should have been able to figure it out for myself -- but my mind has a block - and I'm at a loss... Here's what I need to do: I need to airbrush on a cross shaped cookie. I have to add the baby's name. I was going to make a stencil out of vinyl - but WTF do I do with the middle of the lowecase "a" because once I peel the backing away, there goes the center of my "a". Is there a product that takes care of this? a technique? or do I simply have to use a font where it's all connected and make my stencil out of vinyl? Thanks, as always!! Lisa Share this post Link to post Share on other sites
midwaste 4 Posted June 29, 2010 You can either find a stencil font like you mentioned or you can just place it by hand with the tip of an xacto. Share this post Link to post Share on other sites
wasatchcars 0 Posted June 29, 2010 I have never tried this but always planed to just to see hot it works. What it you used a screen like from a screen on your window Put your vinyl on the screen and then spray through the screen? Sort of like a silk screen with big holes? Share this post Link to post Share on other sites