mwdesigncreate 0 Posted June 18, 2010 Hello all, Having a hard time getting the contour cutting on my laserpoint 24" to work correctly. Using my own reg marks on my prints didn't work. I have SignCut Productivity Pro, not X2. From all the reading on the forum I've done, looks like a need a template with the pre-drawn registration marks to get it going correctly. And yes, I calibrated the "laserpoint offset" several times. For some reason I don't have the sample files the were supposed to come with SignCut. So would anyone be kind enough to send me some of these sample templates? I would be very greatful to anyone that could help, and point me in the right direction. Thank you thank you thank you!!!!! My email is mwdesigncreate@yahoo.com Share this post Link to post Share on other sites
Guest YHC Posted June 18, 2010 While looking around, I ran across this setup guide that might help some users. So here you go and I hope it helps someone: http://www.sc-x2.com/files/pdf/setup_contourcutting.pdf Share this post Link to post Share on other sites
CRD 9 Posted June 19, 2010 http://forum.uscutter.com/index.php/topic,25246.0.html try this one Paco Share this post Link to post Share on other sites