HHeaglepub 0 Posted June 18, 2010 I did a set of white rally strips for a customer with Oracal vinyl and he now has a brown stain on the stripe where a wet leaf fell on his car. Any suggestions on what to use to clean the stain without damaging the vinyl? Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted June 18, 2010 Never heard of stained vinyl - contact Oracal Share this post Link to post Share on other sites
windasm 0 Posted June 18, 2010 He could probably use one of the pads to remove grime from a windshield. I would also add like a teaspoon of bleach to 3 gallons of soapy car wash water to use with the pad. Just gently scrub the stain and rinse really well. Share this post Link to post Share on other sites
bamafan2277 50 Posted June 18, 2010 Or try a MR Clean Magic Eraser. Share this post Link to post Share on other sites
HHeaglepub 0 Posted June 22, 2010 Never heard of stained vinyl - contact Oracal I had never heard of either, but I saw it - it looked like brown leaf stain. This was on Oracal 751. Share this post Link to post Share on other sites
HHeaglepub 0 Posted June 22, 2010 He could probably use one of the pads to remove grime from a windshield. I would also add like a teaspoon of bleach to 3 gallons of soapy car wash water to use with the pad. Just gently scrub the stain and rinse really well. Thanks for the input, I'll we'll give it a try. I also pulled down some info from Oracal which said to try alcohol first if not, then try an orange citrus cleaner. Share this post Link to post Share on other sites