wasatchcars 0 Posted June 4, 2010 Everything I have done to this point has been stuff I install so I have only used med tac R tape and im happy with it. I am getting ready to start selling pre made for some car lots and as we know R Tape does not show the decal that well. Should I cough up the $50 for a 24" roll of clear knowing I will only use it for these decals? Also im thinking $2 for 6"X12" simple lettering Low Miles DVD Player and so on Share this post Link to post Share on other sites
JoeDirt 5 Posted June 4, 2010 I use clear poli tape from rjsign they have thinner rolls you can get a 2" wide roll. This is the best clear that I have worked with, I use it to layer multi color decals. http://www.rjsign.com/Merchant2/merchant.mv?Store_Code=RSS&Screen=CTGY&Category_Code=POLI Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted June 5, 2010 Just my 2c it is a hassle - the clear will tunnel and look bad over a short time. After all isn't the final product the main thing Share this post Link to post Share on other sites
knucklehead 530 Posted June 5, 2010 Yep, have to agree with Scott, the clear is fine for anything you can send flat, but when you roll it, it goes to crap. Share this post Link to post Share on other sites
signguyjohn 0 Posted June 5, 2010 I also use poli tape and as said it is the best I have tried, but, it does tunnel as been said also.. So I also agree with the others. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted June 5, 2010 after getting the light table I almost never use clear anymore Share this post Link to post Share on other sites
wasatchcars 0 Posted June 5, 2010 Thanks for all the input. Now I feel better about not wanting to get any clear. I will be sticking with good old R tape Share this post Link to post Share on other sites